sim_avr.h File Reference

#include "sim_irq.h"
#include "sim_interrupts.h"
#include "sim_cycle_timers.h"
#include <stdarg.h>
#include "sim_io.h"
#include "sim_regbit.h"

Include dependency graph for sim_avr.h:

Go to the source code of this file.

Data Structures
struct	avr_trace_data_t
	This is only ever used if CONFIG_SIMAVR_TRACE is defined. More...
struct	avr_t
	Main AVR instance. More...
struct	avr_kind_t
	Static constructor for each of the AVR devices. More...
struct	avr_symbol_t
	Symbol loaded from the .elf file. More...

Macros
#define	AVR_LOG(avr, level, ...)
#define	AVR_TRACE(avr, ...)   AVR_LOG(avr, LOG_TRACE, __VA_ARGS__)
#define	IO_START_ADDRESS   0x20
	IOs are located just after the register file (32 registers) More...
#define	AVR_IO_TO_DATA(v)   ((v) + IO_START_ADDRESS)
	Map an IO address to the SRAM address space, i.e. add the register file offset to the address. More...
#define	AVR_DATA_TO_IO(v)   ((v) - IO_START_ADDRESS)
	Unmap an IO address from the address SRAM, i.e. subtract the register file offset to the address. More...
#define	OLD_PC_SIZE   32
	DEBUG ONLY This keeps track of "jumps" ie, call,jmp,ret,reti and so on allows dumping of a meaningful data even if the stack is munched and so on. More...

Typedefs
typedef uint32_t	avr_flashaddr_t
typedef uint8_t(*	avr_io_read_t) (struct avr_t *avr, avr_io_addr_t addr, void *param)
typedef void(*	avr_io_write_t) (struct avr_t *avr, avr_io_addr_t addr, uint8_t v, void *param)
typedef void(*	avr_run_t) (struct avr_t *avr)
typedef struct avr_t	avr_t
	Main AVR instance. More...
typedef struct avr_kind_t	avr_kind_t
	Static constructor for each of the AVR devices. More...
typedef struct avr_symbol_t	avr_symbol_t
	Symbol loaded from the .elf file. More...
typedef void(*	avr_logger_p) (struct avr_t *avr, const int level, const char *format, va_list ap)
	Type for custom logging functions. More...

Enumerations
enum	{ LOG_OUTPUT = 0, LOG_ERROR, LOG_WARNING, LOG_TRACE }
	Logging macros and associated log levels. More...
enum	{   S_C = 0, S_Z, S_N, S_V,   S_S, S_H, S_T, S_I,   R_XL = 0x1a, R_XH, R_YL, R_YH,   R_ZL, R_ZH, R_SPL = AVR_IO_TO_DATA(0x3d), R_SPH,   R_SREG = AVR_IO_TO_DATA(0x3f), MAX_IOs = 280 }
enum	{   cpu_Limbo = 0, cpu_Stopped, cpu_Running, cpu_Sleeping,   cpu_Step, cpu_StepDone, cpu_Done, cpu_Crashed }
	Core states. More...

Functions
avr_t *	avr_make_mcu_by_name (const char *name)
	Locate the maker for mcu "name" and allocates a new avr instance. More...
int	avr_init (avr_t *avr)
	Initializes a new AVR instance. Will call the IO registers init(), and then reset() More...
avr_t *	avr_core_allocate (const avr_t *core, uint32_t coreLen)
	Used by the cores, allocated a mutable avr_t from the const global. More...
void	avr_reset (avr_t *avr)
	Resets the AVR, and the IO modules. More...
int	avr_run (avr_t *avr)
	Run one cycle of the AVR, sleep if necessary. More...
void	avr_terminate (avr_t *avr)
	Finish any pending operations. More...
void	avr_set_command_register (avr_t *avr, avr_io_addr_t addr)
	Set an IO register to receive commands from the AVR firmware it's optional, and uses the ELF tags. More...
void	avr_set_console_register (avr_t *avr, avr_io_addr_t addr)
	Specify the "console register" – output sent to this register is printed on the simulator console, without using a UART. More...
void	avr_loadcode (avr_t *avr, uint8_t *code, uint32_t size, avr_flashaddr_t address)
	Load code in the "flash". More...
void	avr_core_watch_write (avr_t *avr, uint16_t addr, uint8_t v)
	These are accessors for avr->data but allows watchpoints to be set for gdb IO modules use that to set values to registers, and the AVR core decoder uses that to register "public" read by instructions. More...
uint8_t	avr_core_watch_read (avr_t *avr, uint16_t addr)
void	avr_sadly_crashed (avr_t *avr, uint8_t signal)
	Called when the core has detected a crash somehow. More...
void	avr_global_logger (struct avr_t *avr, const int level, const char *format,...)
	Logs a message using the current logger. More...
void	avr_global_logger_set (avr_logger_p logger)
	Sets a global logging function in place of the default. More...
avr_logger_p	avr_global_logger_get (void)
	Gets the current global logger function. More...
void	avr_callback_sleep_gdb (avr_t *avr, avr_cycle_count_t howLong)
	These are callbacks for the two 'main' behaviour in simavr. More...
void	avr_callback_run_gdb (avr_t *avr)
void	avr_callback_sleep_raw (avr_t *avr, avr_cycle_count_t howLong)
void	avr_callback_run_raw (avr_t *avr)
uint32_t	avr_pending_sleep_usec (avr_t *avr, avr_cycle_count_t howLong)
	Accumulates sleep requests (and returns a sleep time of 0) until a minimum count of requested sleep microseconds are reached (low amounts cannot be handled accurately). More...

Macro Definition Documentation

#define OLD_PC_SIZE   32

DEBUG ONLY This keeps track of "jumps" ie, call,jmp,ret,reti and so on allows dumping of a meaningful data even if the stack is munched and so on.